Follow the steps on the website to update the controller to the latest settings. 4. My controller wont connect to my iPhone. • Press and hold “home button” & “share” on your controller for 5 seconds until the LED's repeatedly blink.The controller is now in “pairing” mode. • Navigate to settings on your iPhone™. Now, find your controller’s reset button. It is located at the back of your PS4 controller. Push the reset button using an unfurl paper clip. Hold the reset button for over 30 seconds. After 30 seconds, release the reset button. Now, reconnect the controller. If the PS4 controller is still not connecting to the PC, jump to the next fix. The first way is to do a soft reset on your PS4 controller. To do this, go to Settings > Devices > Bluetooth Devices. Highlight the controller you want to reset and press the Options button. Then select “ Forget Device .”. The second way to unpair your PS4 controller is to turn off your PS4 console and then press and hold the PS button on Hold the PS-button and Share-button simultanously for some seconds while the PS4 is turned on. This will reset all connections of the controller and searches for a new one. If this doesn't help, try different USB-cables after resetting. If that also doesnt work, your controller is probably damaged. - DualShock 4 Keep the tool inserted (which will press the reset button inside) for about five seconds. Your controller is now reset and ready to be paired with your console. To pair it again, plug your controller into the USB port on your console. Then turn on your console. When your PS4 turns on, on your controller, press the PS button. Discharge the PS4’s battery by pushing the power button on the console. Connect the controller to the console with a USB cord. Turn on the PS4 and press any of the controller’s buttons. Now, it should be possible for the PS4 system to detect the controller and that the PS4 controller white light issue is gone. LWprpm. We have made a research, and came to the conclusion that reWASD can’t remap them the same way it can remap Xbox Elite 1 or 2 paddles. So this type of controllers will be seen as Xbox 360 or One. Make sure to check Supported devices to see how your controller will be detected by reWASD. 7. reWASD doesn’t launch after installation Ensure last paired PS4 is not in range to be turned on by controller. If it is in range, unplug it so it won't turn on. Plug in controller to non-paired PS4 while it is turned off. Turn on PS4 via the button on the system. Press PS button on controller, this should pair the device. *If previous step didn't work, press the sync/reset button on A PS4 controller can be plugged into a PS3 using a Male USB A to Male Micro USB B. If this doesn't work, your console, controller or cable may be faulty. Before starting to wirelessly pair, you must ensure your playstation version is above 4.6. You can check this at Settings > System Settings > System Software. Method #5: Re-enable controller in device manager. If you still have problems detecting the controller, we suggest that you head over to the next solution, i.e., re-enabling the DS4 controller. To begin, do these steps: Step 1: To launch the Run prompt, right-click on the Start menu and select Run, or press the Windows + R keys simultaneously. If you’re having issues with your controller, often the first troubleshooting step is to reset your controller. Turn off your PS5 console or PS4 console. Locate the small reset button on the back of the controller. Use a pin or similar tool (not included) to press and hold the reset button. Connect the controller to your PS5 console or PS4 Choose “Turn off devices.”. Switch off the console. To reset the controller, use a pin to push its reset button for at least five seconds. Switch the console on, then connect the controller

can t connect ps4 controller after reset